Gleason Model 23 Segmental Gear Tester. Max diameter 20″, Large Spindle Bore, High Accuracy, Excellent Condition

Category: GEAR TESTERS, BEVEL, SPIRAL/HYPOID Reference Number: 3843 Description: MACHINE SPECIFICATIONS:
* Maximum offset of gear spindle above or
below center of pinion spindle 3.50″
* Maximum distance from center of gear
spindle to nose of pinion spindle 12″
* Minimum distance from center of gear
spindle to nose of pinion spindle 6″
* Maximum distance from center of pinion
spindle to nose of gear spindle                            7.75″
* Minimum distance from center of pinion
spindle to nose of gear spindle                                       4.125″
* Bore of pinion spindle (large end) 3.9″
* Taper of pinion spindle bore 39/64″ per foot
* Bore of gear/brake spindle (large end) 2.295″
* Taper of gear/brake spindle 1/2″ per foot
* Maximum diameter gear 20″
* Floor space required                                                 60″ x 73″
* Machine approx. net weight 5300 lbs.

MACHINE EQUIPPED WITH:

* hydraulic work chucking cylinders on pinion
and gear spindles, (less draw-in bar & nuts)
* pinion spindle bore 3.900″ at large end
* adjustable drive gear spindle head
w/crank handle & graduated dial
* guards, covers, handwheels
* electrical controls
* operator’s manual, wiring & hydraulic diagrams

For any questions contact Rich Piselli E-mail: rich@pisellient.com Phone: 704.609.0766