Gleason Model 106 Hypoid Gear Generator, Max. Cone Distance 4.25″, Rebuilt 1985

Category: GEAR GENERATORS, BEVEL, (Spiral/Hypoid) Reference Number: 3844 Description: SPECIFICATIONS:
Max. Cone Distance 4.25″
Extreme Ratio 10:1
Gear Pitch Diameter:
30 degree Spiral Angle 10:1.5″
30 degree Spiral Angle 2:17.5″
30 degree Spiral Angle 1:16″
Coarsest Diametral Pitch 4
Max. Full Depth .625″
Max. Full Width                                            1.25″
Number of Teeth 5-150
Work Spindle Taper No. 39
Diameter of Taper Hole at Large End 3-29/32″
Taper per Foot                                                                39/64″ 
Depth of Taper 6″
Diameter of Hole thru Spindle 2-7/16″
Work Head Settings, Offset Below & Above Center 3″
Max. Distance Machine Center to Spindle Nose 9″
Min. Distance Machine Center to Spindle Nose 1.25″
Range of Cutter Speeds 54-413 RPM
Range of Feeds (Seconds per tooth) 5-73 sec.
Approx. Floor Space 84″ x 61″
Floor Height 66″
Approx. Weight 15,500 lbs

THIS MACHINE IS EQUIPPED WITH THE FOLLOWING:
* Misc. Change Gears For any questions contact Rich Piselli E-mail: rich@pisellient.com Phone: 704.609.0766