Moore Model 3 Jig Bore, New 1967

Category: BORERS, JIG – See J5004

Reference Number: 3850

Description:

*** Very Good Condition***

Table Working Surface 11″ X 24″
Longitudinal Table Travel 18″
Cross Travel 11′
Table Top to Spindle End 3-7/8′ to 20-13/16′
Spindle Quill Travel 5″
Spindle Center to Column Ways 10″
Spindle Center to Column Below Ways 13-3/4″
Boring Cap 5/32″ to 5″
Spindle Speeds Via 2-Speed Motor 60-2250 RPM
Feeds per Rev. (3) .00075,.0015,.003
Weight 3,900 lbs

Features:
* All hardened,ground and lapped ways
* All locational tolerances to less than a “tenth”
* Faster strokes for chop grinding
* Infinite spindle  speeds, 40-250 RPM
* Two-speed motor (1HP/ 2HP)

For any questions contact Rich Piselli

E-mail: rich@pisellient.com

Phone: 704.609.0766