Fellows Model 10-4, 3-Axis CNC Gear Shaper, 10″ Diam. , 4″ Face, 3″ Riser, Fanuc 32I-B Control, Tailstock pinion support Immaculate condition New 2012 inspect under power!!

Category: GEAR SHAPERS, N/C & CNC Reference Number: 4036 Description:

Machine Specifications Are As Follows:

Max pitch diameter (External)                               10″
Max pitch diameter (Internal)                                10″
Max face width, external & internal                       4″
Spindle Positioning Axis                                        0-3”
Max diametrical pitch spur                                     4 DP
Max diametrical pitch helical                                 5 DP
Bore through work spindle                                     5.875″
Cutter spindle diameter                                          3.543″
Max helix angle with special guides                      45 deg.
Distance between table & cutter (w/3″ riser)        13″
Max. OD of fixture                                                19″
Dimensions (L x H x W)                                        91″x 105″x 72″
Machine net weight, approx.                                 13,000 lbs.


Equipment Features:
* Fanuc 32I-B 3-Axis CNC Control
* 20 HP spindle motor with programmable AC variable drive to control stroking speed
* Stroking speeds from 50-900; other SPM available upon request
* Standard spur guide.
* New X axis infeed system
* X axis absolute scale
* 1 Cutter spindle back off cam
* Remanufactured table group and upper saddle assembly
* X-Axis box ways reground and fitted
* Machine comes as a complete unit and requires minimal setup
* Work table surface reground
* New electrical cabinet with air conditioning system
* 3/4 HP coolant pump
* 1-set documentation (hydraulic, electrical, mechanical)


Control Features:
* C-Axis work table rotation
* X-Axis work table infeed
* B-Axis cutter spindle rotation
* Programmable stroking speeds
* Cutter at top feature
* Custom Macro screens for easy conversational programming
* One to five cuts can be selected
* Segment cutting
* Single index and/or slot cutting
* Sizing cycle feature used to make corrections to the size of a part without running through a complete multi cut cycle
* Part programs can be stored in nonvolatile memory with up to 15 characters
* RS-232, S Ram, and Ethernet communication ports

Options on Machine:
* Special SWING-AWAY Tailstock/ Pinion Support
* 3″ Riser Assembly
* 3/4 Cabin Enclosure with Interlock Safety Guarding

Note: all this work was done in 2012 when machine was delivered  Remanufactured  “Like New”as machine has very low hours only 557 Hours!! 

Hydraulic System:
* Integral to the machine providing lubrication and pressures for tailstock and work clamping if required
* Trabon lubrication system with feedback sensors for lube pulse monitoring

** Machine is complete and ready to run. Available for Immediate Delivery!!

** Call to set up an under power Inspection NOW!!

*** Not a nicer machine on the Market Today!!! Call 704 609-0766 to set up an Inspection!

For any questions contact Rich Piselli E-mail: rich@pisellient.com Phone: 704.609.0766