Liebherr model LC-282 CNC Gear Hobber, with Auto loading, Dry cutting and / or wet , LH-90 Cnc Controls, Chip Conveyor, inspect under power , excellent condition NEW 2003

Category: GEAR HOBBERS, N/C & CNC

Reference Number: 4038

Description:

Machine Catalog Specifications: 

Maximum modul hobbed 7 mm
Minimum Number of teeth 4
Maximum Hob Diameter 160 mm
Maximum Hob Length 230 mm
Maximum Hob Speed 1100 Rrm
Hob Head Swivel Range +/- 45
Table Diameter 230 mm
Maximum workpiece table load 18kn

Maximum working ranges:
centerline of Hob to centerline of Table 230 mm
Maximum Part Diam. (depends on style of loading and  Hob diameter used) 
Axial cutting length 350 mm
Cutting Range above table 100 mm
Max Tailstock height above table 840 mm
Min Tailstock height above table 390 mm

Machine Electrics 460V / 60 HZ
Control Voltage 24 Volts
Max Nominal Current 56 amps

Machine is equipped with the following:
Liebherr CNC LH-90 Controls
Dry-Cutting and/ or Wet Option
Hob arbor (1.5″ Diameter)
Auto load system with carousel and 180 degeee loader
misc loading tooling , grippers , pucs , etc
Hydraulic table clamping
Chip Conveyor

Machine can be set up to run Pinions or Gears as they are set up to run both styles in present plant location. Machine can be inspected under power for a short time only with proper notice.

Machine has been running utilizing the Dry-cut hi-speed hobbing technology. These production style machines are presently making good quality parts. Inspect presently Under power in SC.

For any questions contact Rich Piselli

E-mail: rich@pisellient.com

Phone: 704.609.0766