Gould & Eberhardt Model 96-GH CNC Gear Gasher , 100″ Max 16″ Min External Diam. Gashing , 100″ Max , 32″ Min Internal Diam. 50″ vertical slide travel, 1 DP, Fanuc Controls New 2009

Category: GEAR CUTTERS, GASHERS (Incl. CNC) – See Also G1604 Reference Number: 4041 Description:

This G&E Gear Gashing machine is designed to cut both External and Internal diameter Gears and Splines. The New design of this machine is more Rigid and Robust than most machines of its size from Similar OEMS.

Machine Capacities: For G&E Model 96-GH (3-Axis) CNC SPUR Gear Gasher

Max Gear Diameter  Ext 110″
Min Gear Diameter Ext 16″
Max Face width Ext 55″
Max Internal Gear Diameter 100″
Min Internal Gear Diameter 32″
Max Pitch Ext 1 DP
Max Pitch Int 1.5 DP

Machine Specifications and dimensions:
Diameter of work Table                                  80″
Bore Diameter in Work Table                         23″
Maximum load on Table                                 80,000 lbs
Table worm Gear Diameter                             76″
Number of Teeth                                              inf variable
Power requirements                                         480V 3 Phase, 60Hz
Pneumatic requirements                                   80 CFM at 90 PSI

G&E Gasher with Standard Equipment:
Fanuc 18I- B Pendant Control with Gear gashing Software
Oil Recirculation w/ filtration
Oil Chilling System
Split 2-Piece table/ Stanchion Design
Single Stanchion machine assembly
Chip Conveyor

Control Features
* C-Axis  (Work Table Rotation)
* X-Axis  (Radial Infeed)
* Z-Axis  (axial Feed)
* Fanuc Spindle motor for Cutter Rotation

Programs Feature:
-Custom Macro Screens for Easy Conversational Programming
-1 – 3 Cut cycle programming
– Crowning amounts are input by the desired amount on the flank of the gear
– Single Index Milling 
– Programmable Taper
– Sizing cycle Feature ( allows you to cut small numbers of teeth to make corrections)
– RS-232 , S Ram Card storage and Ethermet ports

Machine is equipped with the following Gashing Head:
(4.1) G&E Standard External Gashing Head
With 40 KW Spindle Motor

Head Capacities:
Maximum Gear Diameter                                        200″
Maximum Pitch Gashing                                         1 DP
Maximum shift Tangential                                       0″
Maximum Cutter Diameter                                       18″
Maximum Cutter Width                                             5″
Maximum Spindle speed                                           0-125 RPM


Optional Internal Gashing Head
(5.2) G&E Standard Internal Gashing Head
Utilizing same 40 KW  Spindle Motor,
w/ Direct Hook up with Quick Change Features

Internal Head capacities:
Minimum internal Gear Gear Clearance               32″
Maximum tooth pitch                                            1.5 DP (17 Mod)
Maximum Face width                                            14.2″
Maximum Throat Distance                                    17″
Spindle speed                                                         0-125 RPM
Maximum cutter Diameter                                     16″
Maximum Cutter Width                                          90mm

THIS INTERNAL HEAD CAN BE SUPPLIED AT ADDITIONAL COST (Inquire)

This machine is being supplied with the Standard External Gashing Head model (4.1) described above as noted.

Machine is being sold with all misc tooling , fixtures and cutters purchased by customer for this machine!!!

The machine has been removed from service and put in storage after only being used to cut 15-20 Test gears after the WIND ENERGY crash in 2009.

Price includes loading on customers trucks 

Installation can be quoted based on a pit or floor mount positioning. and or as a complete job or on an hourly basis. Customer is responsible for all rigging , unloading and foundation work. Piselli Enterprises would quote for supplying the labor for completing the machine wiring , hook-up, and final installation, once machine is properly placed in its final position. Piselli enterprises can also quote the Operator training as well on site . 

 Machine is sold on a first come basis,

Terms:
 Payment is due in full prior to loading from customers facility.

Original foundation drawings and manuals are also included with machine purchase.



For any questions contact Rich Piselli E-mail: rich@pisellient.com Phone: 704.609.0766