NILES Model ZE400S CNC Gear Grinder, 400mm diameter cap., Form wheel machine, CNC Dressing , probing, Standard External Grinding Head & Small wheelhead attachment new 2007 delivered 2008, Only 3200 Hrs LIKE NEW CONDITION!!

Category: GEAR GRINDERS, N/C & CNC

Reference Number: 4043

Description:

KAPP/NILES ZE 400S CNC Form Wheel Grinder Delivered in 2008 
W/ Small wheelhead attachment , Only 3,226 Hours


Machine Technical Data: MM / Inch


Tip Diameter 400mm/15.7″
Rotary Table- Grinding wheel center Dist 100/400mm-3.94″/15.7″
Number of Teeth  Infinite
Profile Depth 35mm/1.38″
Modul 15mm/1.7 DP 
Helix Angle 45 Deg
Stroke Length 400mm/15.75″
Face width (Spur Gear) 390mm/ 15.37″
Rotary Table Diameter 400mm/15.75″
Rotary Table load 450 kg/ 990 lbs
Rotary Table Bore ( Diam x Depth) 125 x 500mm/4.92″ x 19.7″
Tailstock Clearance height (min-max)  490mm-970mm/ 19.31″-38.22″


Grinding Wheel
:
Diameter 300mm/11.82″
Min Dressable Diam. 180mm/7.09″
Width 63mm/2.48″
RPM 4,165 RPM
Drive Power 13.5 kW
Torque Grinding Spindle 33 NM

Small Wheelhead attachment Kapp #2:
Spindle diameter 20mm
Wheel diam. Range 50mm-100mm

Machine power and space requirements
:

Total Connected load 62 kva
Voltage 460/480 volt
Space requirement (LxWxH) 4000 x 4500 x 3000mm
156″ x 177″ x 118″ H


Machine is equipped with the following
:

Siemens 840D Sinumerik CNC controls
Standard External Grinding Spindle
Small Wheelhead Attachment (in crate)
CNC Dressing Unit
On-Board Inspection w/printer @ machine
Probing Head
Wheel Flange
Diamond Dressing Disc
Hoffman filtration System & Chiller model HSF-100SE
Work Fixtures & Misc tooling
Full Guarding and Equipment
Full manuals & Documentation

Machine can be inspected in plant under power and tested on the west coast in “Like New” Condition. The machine has only 3,226. total Running Hours!!!

Why Buy New when you can Buy This late Model fully tested Low hour Machine!!!

For any questions contact Rich Piselli

E-mail: rich@pisellient.com

Phone: 704.609.0766