Liebherr L-650 Gear Hobber , 26″ Diam Cap., 2.5 DP, 22″ Table Diam., 7.5″ max hob Diameter, 14.5″ hob carriage slide, 32″ max length of part. updated motor drive rebult 3 months ago , good running condition! inspect in NC!!

Category: GEAR HOBBERS, VERTICAL – See Also H4500

Reference Number: 4092

Description:

LIEBHERR Gear Hobbing Machine
Model L-650 , S/N 0661-15

This Liebherr machine was purchased from customers plant running good quality parts. It was removed due to the purchase of several New Machines and additional space was required. The customer had recently upgraded and repaired some of the motors which cost the over $7,000.. only three months prior to our removal.
This machine should be an excellent addition to any shop requiring a good mid range gear cutting machine for roughly 24″ diameter gears! inspect in our Statesville facility Under power!

MACHINE CATALOG SPECIFICATIONS:
Max Diameter 650 mm /26″
Max traverse of Hob carriage 370 mm/ 14.5″
Max Pitch in steel 10 mm / 2.54 DP
Work Table Diameter 560 mm/ 22″
Bore in work Table 140 mm / 5.512″
Taper of work Arbor    MT 5
Max Hob Diameter 192 mm/ 7.56″
Max Hob Length 200 mm/ 7.87″
Hob RPM Min / Max 30 rpm – 240 rpm
Max Hob Shift 30 mm / 1.181″
Center Distance Min/Max 50mm / 1.9″ – 435mm/17.12″
Hob spindle centerline above table (Min) 215mm / 8.465″
Feeds and speeds Infinitely Variable

Machine Weight  10 tons

Machine is equipped with the following:
Variable speed motor rebuilt 
2- cut cycle
infinitely variable feeds and speeds
Hob Shift
Hob arbor
Change gears
Chip Conveyor
Machine work guarding

Machine can be inspected in our Statesville NC facility under power with proper notice. Call to set up an under power inspection today! 

Taken from customers plant and inspected under power in excellent running condition.

call  Rich @704 609-0766 if you require any more specific information on this machine

For any questions contact Rich Piselli

E-mail: rich@pisellient.com

Phone: 704.609.0766