Barber Colman model 16-36 Horizontal gear hobber style type A, 16″ Diam, x 36″ Cut Length, A-frame style, machine is complete with Hob arbor and misc change gears , inspect in our NC plant under power

Category: GEAR HOBBERS, HORIZONTAL – See Also H4500 Reference Number: 4123 Description:
Barber-Colman Horizontal Gear hobber Machine
s/n 517
A-frame style machine

This Horizontal style hobbing machine can be inspected under power in good operating condition. the machine corresponds to the following specifications and equipped as follows

Machine specifications
*Max DP in Steel 6 DP-10 DP
*Max Work OD 16″
*Max Hob Slide Travel 36″
*Diameter Hole Thru Work Spindle 3-/1/8″
*Max Hob Diameter 5″
*Max Distance Face of Work Spindle to Tailstock        40″
*Max Vertical Adjustment of Work Spindle 8″
*Max Hob Slide Swivel Angle Setting-Degree 45 degrees
*9 Hob Speeds 59-246 RPM
*Hob Feeds .0075-.1125″

MACHINE IS EQUIPPED WITH:
1 Hob Arbor
Rapid traverse
Manual hob shift
tailstock with screw type center
a-frame style machine
Dual start worm
3-Jaw precision chuck
Misc. Change Gears 

Machine can be inspected under power with proper notice in our Statesville  NC facility!


For any questions contact Rich Piselli E-mail: rich@pisellient.com Phone: 704.609.0766