Fellows model 36-6 Gear shaper , 40″ max Diameter , 6″ stroke capacity, equiipped with 6″ riser assembly , 4″ spindle diameter, inspect in statesville NC under power

Category: GEAR SHAPERS Reference Number: 4128 Description:

Fellows Gear shaping machine
Model 36-6 
S/N 26558
equipped w/ 6″ Riser assembly

This fellows model 36-6 machine will be gone through and adjusted as required , entire machine has already been inspected and work load required is understood for customer to receive a good running machine; 2 weeks of work and another week for cleaning and painting for a total of  3 weeks from receipt of order and down payment

* Maximum Pitch Diameter External 40″
* Maximum Pitch Diameter Internal 36″
* Maximum Workpiece & Fixture Diameter 42″
* Maximum Face Width          6″
* Stroke Length          6″
* Maximum Helix Angle 45 deg
* Maximum Diametral Pitch
-For Spur Gears          3 DP
-For Helical          4/5 DP
* Work Spindle Bore Diameter 5.875″
* Twelve (12) Stroking Speeds, w/ranges 18-300 spm
* Machine Dimensions          92″x 60″x 110″H
* Machine Weight, Approx.         19,000 Lbs

Machine Is Equipped With:

6″ Riser Assembly 
4″ spindle diameter
Misc. Change Gears
1 Cutter Adapter
Machine Guarding
operators Manual

Machine can be inspected under power with proper notice. additional adaptors can be purchased if required. send us your part prints to confirm what you require on this machine. Please note above that this machine will require 3 weeks to complete from receipt of order . Standard silver white or machine gray colors are available at No additional cost for this machine. For any questions contact Rich Piselli E-mail: rich@pisellient.com Phone: 704.609.0766