Mitsubishi Model GC-40 6 axis CNC Gear hobber, 16″ max diameter gear, 15″ face, 6″ diam Hob, chip conveyor, Fanuc Controls, new 1997 inspect under power

Category: GEAR HOBBERS, N/C & CNC Reference Number: 4139 Description:

Mitsubishi 6 Axis CNC Gear Hobbing Machine
Model # GC-40 
S/N 
AGE 1997

This Mitsubishi CNC Gear Hobbing machine can be inspected in excellent condition under power in our Statesville NC Plant. the machine was recently removed from a shop cutting the gears in the attached photograph. the machine is a very flexible Job Shop Machine.

Machine specifications are as follows:

PRINCIPAL SPECIFICATIONS: 
Maximum work-piece diameter 16″/400mm 
Maximum diametrical pitch/module (8M) 
Maximum swiveling angle +45o 
Minimum number of teeth
Maximum number of teeth 1000
Center distance Max/ Min Hob spindle to work spindle 11.8″(300mm)/1.57″ (40mm) 
Maximum radial travel 10.6″ (270mm) 
Max. height work table to center of hob spindle 23.6″ (600mm) 
Min. height work table center to hob spindle center 7.9″ (200mm) 
Maximum axial travel 15.7″ (400mm) 
Programming unit English (inch) 
Distance between worktable and tailstock Max/Min 29.1″ (740mm)/13.4″(340mm) 
Worktable diameter 11.8″ (300mm) 
Maximum worktable speed 60 rpm 
Maximum hob size Diam 5.9″(150mm) x L 9.1″ (230mm) 
Maximum hob shift 7.1″ (180mm) 
Hob speed range 75-950 rpm 
Feed rate: 
 Axial – inch/min. (mm/min.) 0.04-39.4″ (1-1,000mm) 
 Radial – inch/min. (mm/min.) 0.04-39.4″ (1-1,000mm) 
 Rapid traverse Axial – inch/min. (mm/min.) 393.7″ (10,000mm) 
 Radial – inch/min. (mm/min.) 393.7″ (10,000mm)

Machine is equipped with the following
Fanuc 16 MB CNC Controls
Chip conveyor
Hob arbor
full guarding
tailstock
mist collector 
Books and Manuals

call Rich Piselli to set up and under power inspection of this machine

For any questions contact Rich Piselli E-mail: rich@pisellient.com Phone: 704.609.0766