Gleason Model 512 hypoid gear tester. 20″ max Gear Diam 10″ max Pinion Diam. 39 degree taper., hydraulic clamping, automatic cycles, many features. Inspect in NC under power

Category: GEAR TESTERS, BEVEL, UNIVERSAL Reference Number: 4145 Description:

Gleason Hypoid Bevel Gear Tester
Model# 512 Automatic tester
S/N 702808

Machine was purchased from an Off-Highway customer whom had shut down their plant. Machine is in very good running condition and can be inspected under power in our shop 


GLEASON 512

MACHINE SPECIFICATIONS

CAPACITY

Gear outside diameter (maximum) 508 mm

Pinion outside diameter (maximum) 254 mm

Offset of pinion spindle left or right of gear spindle center (maximum) 101.6 mm

PINION SPINDLE

Diameter of taper hole at large end 3-29/32″

Taper per foot …………………………………………………………………………..  39/64″

Depth of taper 3″

Diameter of hole at small end 3.740″

Depth of hole at small end from face of spindle 15.5″

GEAR SPINDLE                                               Standard    Large Bore

Diameter of taper hole at large end                   2-19/64″    3-29/32″

Taper per foot                                                 1/2″           39/64″      

Depth of taper                                                 3″              3″

Depth of hole at small end                                2.168″        3.740″

Depth of hole at small end from face of spindle  8″               7”

Machine Is Equipped with the following 
Safety Guarding when operating
control pendant
hydraulic clamping
forward and reverse cycles
hydraulic unit
Electrical panel attached with operator pendant control

this machine can be inspected under power with proper notice
please contact us today to see this machine and other gear machines in our NC facility
For any questions contact Rich Piselli E-mail: rich@pisellient.com Phone: 704.609.0766