Barber-Colman model 6-10 gear hobbers, 6″ diam x 10″ part length, 16 dp , v-ways , C-frame style, Bayonet style centers, timken bearing spindles, Nice machines 4 avail.

Category: GEAR HOBBERS, HORIZONTAL – See Also H4500 Reference Number: 4151 Description:

Barber Colman Horizontal Gear Hobbers
Model 6-10 
Ages 1970-1980
4 Available 

These Barber-Colman  machines are of the latest design, V-Ways, C-Frame construction, timkenized Spindle bearings, Bayonette style centers , Automatic hob shift. 

Machine specifications are as follows:

MAXIMUM WORK DIAMETER:                                                                 6″
MAXIMUM TRAVEL OF HOB CARRIAGE:                                              10-1/2″
MAXIMUM DIST. SPINDLE FACE TO TAILSTOCK CENTER:            15-3/4″
MAXIMUM DIAMETRAL PITCH , 1 CUT:                                                16 DP – 2″ DIAMETER
MAXIMUM DIAMETRAL PITCH ,1 CUT:                                                 48 DP – 6″ DIAMETER
MAXIMUM HOB DIAMETER:                                                                      2-1/16″
HOB SPEED:                                                                                                     133 – 533 RPM
WORK SPINDLE BORE:                                                                                1-1/32″
WEIGHT OF MACHINE:                                                                               3,500 LBS.

MACHINE IS EQUIPPED WITH:
Triple Thread Standard Worm
V-Ways
Bayonet Center
Manual & Automatic hob shift
Standard hob head 
Change Gears (small assortment)
1 Hob Arbor
460 volt power 


Machines can be inspected under power in good mechanical condition at our Statesville NC. shop.
contact us for any further information you require

For any questions contact Rich Piselli E-mail: rich@pisellient.com Phone: 704.609.0766