Gleason Model 17A Bevel Gear tester, 20″ max diameter capacity. universal testing machine , push buttons controls, hydraulic clamping, s/n 28970. inspect under power in NC

Category: GEAR TESTERS, BEVEL, UNIVERSAL Reference Number: 4155 Description:

Gleason Universal Gear Tester
Model 17A
S/N 28970

 Model No. 17A GLEASON Hypoid Bevel Gear Testing Machine, suitable for the testing 
 of straight bevel, spiral bevel, and hypoid  gears with shafts intersecting at 90-degrees, with 
 capacity to test gears up to 20″ (508mm) pitch diameter

                                                       Serial No. 28970

The machine corresponds to the attached copy of factory literature, featuring the following:

EQUIPMENT / FEATURES:

hydraulic work chucking cylinders on pinion
  and gear spindles, (less draw-in bar & nuts)
5-HP, 220/440 volt, 3-phase 60 cycle, 1670 rpm main drive motor
3/4 HP, 220/440 volt, 3-phase 60 cycle, 1745 rpm hydraulic motor
pre-set backlash control
brake spindle (2-19/64” bore dia. large end)
adjustable drive pinion spindle  (3-29/32” bore dia. large end) 
  w/crank handle & graduated dial
load meter
guards, covers, handwheels
full complement of electrics, motors/controls) 
operator’s manual wiring diagram & parts list

PRINCIPAL SPECIFICATIONS:

Maximum offset of gear spindle above 
  or below center of pinion spindle ………………………………. 3.5” (88.9mm)
Maximum distance from center of gear spindle
  to nose of pinion spindle ……………………………………. 12” (304.8mm)
Minimum distance from center of gear spindle
  to nose of pinion spindle ……………………………………. 6” (152.4mm)
Maximum distance from center of pinion
  spindle to nose of gear spindle: ………………………………..… 7.75” (196.85mm)
Minimum distance from center of pinion spindle
  to nose of gear spindle ………………………………………….. 4.13” (104.8mm)
Maximum diameter of gear with “zero” offset of gear spindle ….. 20” (508mm)
Machine dimensions (approx.) …………………………………… 60”x 73”x 60”
Machine net weight ………………………………………………. 5,300 Lbs.

This machine can be inspected under power in my Statesville NC Plant with proper notice

please contact us today or visit www.piselliEnt.com for more information on other machines we have in our vast inventory.!

For any questions contact Rich Piselli E-mail: rich@pisellient.com Phone: 704.609.0766