Fellows model 36 Z-1 SPECIAL Gear shaper , 40″ diameter , 6″ Stroke , 36″ Table , 30″ riser, Large hole in the table , 16″ precision chuck, Extended stroke positioning, Excellent condition , Gov Surplus

Category: GEAR SHAPERS Reference Number: 4168 Description:

Fellows Special Gear Shaping Machine
Model 36 Z-1 SPECIAL
S/N 28540

This machine was purchased from Government surplus / Aerospace division. the machine was specially designed by fellows with some very unique features. The machine has extended stroke Positioning capabilities as well as the (z) designation for heavy duty spindle and large hole in the table with Hi-Riser. Another excellent machine offered by Piselli Enterprises

Machine Specifications are as follows:

Maximum Diameter capacity 40″
Maximum stroke capacity 6
Maximum Height above Table 28
Maximum Height under cross slide 31″
Maximum part swing Diameter 42″
Diameter of table 36″
Bore in the table  17″ Need to confirm
Depth of bore in the table ? Need to confirm 
Machine Voltage 480 v
Height of Machine 11′ 4″
Weight of machine 19,000 lbs

Machine is equipped with the following:
Large Bore in the table (TBD)
Cutter Elevation Option for Extended positioning
36″ table diameter
5″ Heavy duty spindle
30″ high riser assembly allowing 28″ clearance height above 3″ thick table
16″ 4-Jaw independent chuck 5-1/2″ tall w/ 4-1/4″ bore
Extended cutter housing for Extended positioning
Extended 8″ Cutter adaptor 
Misc change Gears
Misc tooling

This machine was specially Designed by fellows for large hubs with internal gearing down deep within the part. The large bore in the table feature allows for dropping large parts down through the table and be able to swing around under the spindle and be able to cut both internal or external gears or splines on a variety of parts that are usually tough to MFG on standard fellows equipment.

This machine shows no internal wear and has been extremely well maintained coming from a high quality aerospace facility!! contact us today to set up an under power inspection at your earliest convenience. Also visit our Website for more of our featured inventory selections at www.PiselliEnt.com

For any questions contact Rich Piselli E-mail: rich@pisellient.com Phone: 704.609.0766