Pfauter Model P-3000B vertical Gear hobber, 120″ diam capacity, 1 DP, tailstock, heavy duty hob head,

Category: GEAR HOBBERS, VERTICAL – See Also H4500 Reference Number: 4169 Description:

Pfauter Model P3000B Vertical Gear Hobber
Manufacturer: Pfauter
Model: P3000B
S/N: 21548
Year: 1967
Condition: Good, but disassembled presently

Maximum Workpiece Diameter: 120″
Maximum DP: 1
Minimum Number of Teeth Cut: 16
Maximum Axial Travel: 41.3″
Maximum Helix Angle: 45 Degrees
Center Distance Between Workpiece and Hob:
– Maximum: 65″
– Minimum: 11.8″
Diameter of Work Table: 75″
Diameter of Work Table Bore: 20″
Maximum Hob Dimensions:
-Diameter: 11.4″
-Length: 13″
Maximum Hob Shift: 12″
Hob Speed (infinitely variable): 12 to 150 RPM
Feeds (infinitely variable):
-Axial Feed: .014 to .283 i.p.r.
-Radial: .003 to .059 i.p.r.
-Tangetial .003 to .059 i.p.r.
Main Motor: 20 HP
Total Power Requirements: 42 kVA
Machine Net Weight (approximate): 68,000 LBS
Floor Space Required: 260″L x 159″W x 151″H

Machine is Equipped With:
-Universal Hob Head with Automatic Hob-Shift
-Outboard Support Column with Clamshell Type
-Differential Mechanism
-Hydraulic Table Relief
-Fully Automatic Work Cycles
-Chip Conveyor
-Change Gears

Machine photos were taken prior to removal from Lufkin tx plant . video is available of machine under power prior to removal. Please ocntact us to set up an inspection of machine and components as it can not be shown under power at this time.

For any questions contact Rich Piselli E-mail: Phone: 704.609.0766