Inventory

Anderson Cook Marand Spline roller Model 330S, 24″ rack length, with loading arm & Siemens PLC control, Excellent condition, call for full quote and details  Reference Number: 4080

__________________________________________________________________________________

Barber Coleman, Model 6-5, 6″ Dia, 5′ Length. Hob Sharpener   Reference Number: 3925
__________________________________________________________________________________

Barber Colman model 14-15 Horizontal gear hobber, 14″ max Diam. 15 ” max cut length, automatic cycles, differential, rebuilt by Bourn & Koch good condition                        Reference Number: 4082

__________________________________________________________________________________

Barber Colman Model 14-15, 14″ Diam Capacity, 15″ cut length, Hydraulic clamping, collet fixture, Differential, Very Nice Condition, SN 1396, inspect under power in NC  Reference Number: 3993

__________________________________________________________________________________

Barber Colman model 14-30 Gear hobbing machine, 14″ Diameter, 30″ cut Length, Differential, Dwell, rough & finish cycle, automatic cycles, good condition machine. inspect under power             Reference Number: 4100

__________________________________________________________________________________

Barber Colman Model 6-10, Gear Hobber Large Single Precision Thread Worm Bayonet Center excellent new 1960    Reference Number: 3884
__________________________________________________________________________________

Barber Colman model 6-10 horizontal gear hobber, 6″ diameter x 10″ part length, c-frame style, v-ways, bayonnette center, 3-jaw precision chuck 220/440 power Nice condition machine              Reference Number: 4137

__________________________________________________________________________________

Barber Colman Model 16-56 Gear Hobber, 3-jaw chuck, Misc tooling, inspect under power                      Reference Number: 3961

__________________________________________________________________________________

Barber Colman model 16-36 Horizontal gear hobber style type A, 16″ Diam, x 36″ Cut Length, A-frame style, machine is complete with Hob arbor and misc change gears , inspect in our NC plant under power  Reference Number: 4123

__________________________________________________________________________________

Barber-Colman Model 16-56 Horizontal Gear hobbing machine, 16″ Diameter , 56″ cut length, Downfeed, tailstock and steady rest for long shafts, excellent condition. Inspect under power in NC            Reference Number: 4118

__________________________________________________________________________________

Barber Colman model 16-56 Horizontal Gear hobber, 16″ Diameter x 56″ cut length, 6 DP, Equipped with differential Machanism, Single Thread, Hob arbor, Excellent condition, Inspect under power in NC              Reference Number: 4122

__________________________________________________________________________________

Barber Colman model 16-56 Horizontal Gear Hobber, 16″ max diam, 56″ cut length, Standard machine , hob arbor , tailstock dual thread worm, change gears, good running condition. Inspect in NC.       Reference Number: 4121

__________________________________________________________________________________

Barber Colman Model Type D Gear Hobber, Max.Diameter 14, Max Length 15″, Max. Pitch 3-1/2 DP.   Reference Number: 3882

__________________________________________________________________________________

Barber Colman, Model: 10-12, Hob Cutter Sharpener, 10″ Dia. , 12″ Length, Index Plates , New 1961            Reference Number: 3894

__________________________________________________________________________________

Barber Colman, Model: 22-15, Horizontal Gear Hobber, 22″ diameter , 15″ length of cut, tailstock etc.      Reference Number: 3898

__________________________________________________________________________________

BARBER-COLMAN AUTOMATIC HYDRAULIC HOB SHARPENING MACHINE MODEL #4-4HRSFor sharpening straight and spiral gash hobs.SPECIFICATIONS:Max. Rated Work Diameter 4″Max. Rated Work Length 4″Max. Distance Workspindle Face to Tail Center 15″      Reference Number: 3840

__________________________________________________________________________________

Barber-Colman model 16-16 Horizontal Hobber, 16″ Max Diameter 16″ Part Length, Double thread Index, screw type center, Rebuilt and gone through     Reference Number: 4013

__________________________________________________________________________________


BARBER-COLMAN Model: 6-5 GEAR HOB SHARPENER NEW: 1954, 6″ OD, 5″ Length     
Reference Number: 3841

__________________________________________________________________________________

Barber-colman / Heartland model 6-16 4-Axis CNC Gear Hobber Retrofit, 6″ Diameter x 10″ part length. Machine has been set up to do small bronze worm gears. call for pictures and more details        Reference Number: 4138

__________________________________________________________________________________

Chamfermatic Model twin spindle gear Duburring machines, machine is equipped with full enclosure , automatic door, three jaw universal chucks, PLC controls new 2000’s   Reference Number: 4073
__________________________________________________________________________________

Change Gears and Tooling for Fellows Machines Models 4,6,7,10-4,36-6                                               Reference Number: 3921

__________________________________________________________________________________

Change Gears for Barber-Coleman, G+E, Liebherr, Mikron, Pfauter, TOS and other MFG Hobbing Machines       Reference Number: 3920

__________________________________________________________________________________

Cincinnati Heald model 273A ID Grinder, with 16″ 4-jaw chuck excellent shape in tool room never in production!!      Reference Number: 4020

__________________________________________________________________________________

Craven, Model:28 Horizontal Pinion Hobber, 26″ max OD, 36″ Swing, Max DP 2, 102″ Between Centers, Tailstock, misc tooling & change gears      Reference Number: 3886

__________________________________________________________________________________

CUDA washer Model H20-2840, 28″ rotary turn table washer,WASH, HEAT CYCLES, 40″ height opening – under sprayers’, low water signal, auto cycles, s/n 00599-82724.      Reference Number: 4088

__________________________________________________________________________________

Drake Model 6-36 CNC 5-Axis Thread grinding machine, 6″ max diam., x 36″ Max part length. Fanuc Model O-M controls, machine can be inspected under power in statesville NC.               Reference Number: 4134

__________________________________________________________________________________

Drake Model 12 x 45 , 5-Axis CNC Thread Grinder , 12″ Max Diameter x 45″ Max Part Length, Fanuc O-M CNC Controls, CNC dressing , wheel balancing , and much more , inspect under power in our NC Plant!              Reference Number: 4135

__________________________________________________________________________________

Eitel Straightening Press, model ASP-25-3-5, with Crack detection,3 anvils, exit conveyor , New 1989.             Reference Number: 4034

__________________________________________________________________________________

ELB Horizontal surface grinder, Model SWBEO12 NC-K, 20″ x 48″ table Magnet, fully automatic, coolant & filtration unit, Toolroom machine! Excellent condition. call for full specs and photos, Excellent condition machine     Reference Number: 4085

__________________________________________________________________________________

Empire Bead Blaster, rotary automatic blaster and combination hand assist. auto up and down three nozzles, tank and complete unit. Like new condition s/n M-97-560               Reference Number: 4059

__________________________________________________________________________________

Escofier Incremex 300 E Spline Roller remanufactured in 2011, 45mm part Diameter, 300mm forming dies Diam., 100mm forming dies width.With Siemens samatic controls. w/ pendant. Remanufactured in 2011 by OEM, Excellent condition!          Reference Number: 4033

__________________________________________________________________________________

Ex-Cello Model 35 External Thread Grinder.                 Reference Number: 3929

__________________________________________________________________________________

Fassler CNC Gear Honer model K-300, for honing both internal & External gear teeth up to 9″ diameter x 6″ width x 40″ workpiece length, machine is equipped with siemens 840C.        Reference Number: 4051

__________________________________________________________________________________

Fasti FP60-32/ 6 CNC Panel Bender 127″‘ length X .25″ thickness , back gauge , pendant control, misc tooling, New 2007             Reference Number: 4096

__________________________________________________________________________________

Fellows 7A Gear Shaper, with Tailstock pinion support, 7″ diameter, 1.5″ face capacity. good running condition.         Reference Number: 4016

__________________________________________________________________________________

Fellows Gear Shaper, Model 6A, 13″ Riser, Cutter Elevation, excellent condition.            Reference Number: 3959

__________________________________________________________________________________

Fellows Model 6a Gear shaping machine, 18″ max diameter, 5″ face capacity, 4/5 DP, 3″ diameter spindle , misc change gears, very good condition, Inspect in Statesville NC.             Reference Number: 4101

__________________________________________________________________________________

Fellows model 10-2 Gear shaping machine , 10″ diameter , 2″ stroke, cutter at top , 1260 spm, machine to be gone through, good running condition, Inspect under power in NC             Reference Number: 4119

__________________________________________________________________________________

Fellows Model 10-4 CNC Gear Shaper Retrofitted & RE-Manufactured w/ Fanuc OI -MD controls, New 2017              Reference Number: 3989

__________________________________________________________________________________

Fellows model 10-4 Gear shaping machine, 10″ diameter , 4″ stroke capacity,Cutter at top, A/B PLC 2 control, Plumbed & wired for a tailstock, new cutter spindle & Bushing inspect in NC          Reference Number: 4120

__________________________________________________________________________________

Fellows model 10-4 Gear Shaper. 10″ max diameter, 4″ max stroke length, equipped with 6″ riser assembly and pinion support Tailstock, Excellent in plant!!      Reference Number: 4058

__________________________________________________________________________________

Fellows Model 10-4, 2-axis CNC Gear Shaper with Fanuc Powermate controls, Tailstock. only needs change gears for Number of teeth, year 2000 (two Available)             Reference Number: 4023

__________________________________________________________________________________

Fellows Model 10-4, 3-Axis CNC Gear Shaper, 10″ Diam. , 4″ Face, 3″ Riser, Fanuc 32I-B Control, Tailstock pinion support Immaculate condition New 2012 inspect under power!!             Reference Number: 4036

__________________________________________________________________________________

Fellows Model 100-12 CNC Hydrostroke Gear shaper w/ Fanuc Powermate control. Max diameter 100″ maximum cut length 12″, 84″ diameter table, 20″ maximum clearance height. machine can be inspected in plant under power / Excellent!    Reference Number: 4076

__________________________________________________________________________________

Fellows Model 120-8 Gear shaper, 120″ max diameter capacity, 9″ Stroke , 8″ face capacity, 6″ diameter spindle, 60″ diameter table, change gears , excellent , insppect under power in customers shop  Reference Number: 4074

__________________________________________________________________________________

Fellows Model 18-5 Gear Shaper. 18″ max Diam. 6″ stroke, 5″ Face, 7.5″ Column Positioning, auto cycle, cutter at top , gears and tooling.   Reference Number: 4040

__________________________________________________________________________________

Fellows Model 20-4 cnc 3-Axis Retrofit quotation and scope of work for Remanufacturing and Re-controlling w/ options for the standard model machine.   Reference Number: 4047

__________________________________________________________________________________

FELLOWS Model 36-6 Gear shaper with cutter elevation , 32″ High riser, 42″ swing , 40″ diameter capacity , 6″ stroke , Inspect 3 DP, machine is in excellent running condition. Inspect in Statesville NC      Reference Number: 4106

__________________________________________________________________________________

FELLOWS 36-6 Gear shaping machine, 40″ Diam cap., 6 ” stroke , 3 DP, 24″ Riser , misc guarding, change gears , good mechanical condition, inspect in our NC Facility under power     Reference Number: 4109

__________________________________________________________________________________

Fellows Model 36-6 Gear Shaper, 40″ diameter capacity 44″ swing, 6″ stroke Length, 12″ riser assembly , 32″ table , misc tooling and change gears, Inspect under power in statesville NC      Reference Number: 4097

__________________________________________________________________________________

FELLOWS Model 36-6 Gear Shaping Machine , 40″ max diameter, 6″ Stroke, 3 DP , 17″ throated riser 48″ Max swing, misc tooling change gears , etc. inspect in NC          Reference Number: 4112

__________________________________________________________________________________

Fellows 36-6 Gear shaping machines, 40″ Diameter, 6″ stroke, 12″ throated Riser, 44″ swing , misc tooling and gears, Inspect under power in NC            Reference Number: 4113

__________________________________________________________________________________

Fellows model 36-6 Gear shaping machine, 40″ max diameter , 6″ stroke, 12″ throated riser to swing larger diameter parts, 3 DP, misc tooling, change gears, inspect under power in NC Reference Number: 4114

__________________________________________________________________________________

Fellows model 36-6 Gear Shaping machine, 40″ diameter capacity , 6″ stroke, 3 DP, 13″ riser , misc tooling , change gears, etc. Inspect under power in NC.              Reference Number: 4115

__________________________________________________________________________________

Fellows model 36-6 Gear shaper , 40″ max Diameter , 6″ stroke capacity, equiipped with 6″ riser assembly , 4″ spindle diameter, inspect in statesville NC under power              Reference Number: 4128

__________________________________________________________________________________

Fellows model 36-6 Gear shapers, 40″ max diameter capacity , 6 ” diameter stroke, 4″ spindle diameter , 0-3″ Riser configurations. (4) available. Priced to move!!! inspect in Statesville NC under power !!       Reference Number: 4129

__________________________________________________________________________________

Fellows model 36-6 Gear shaping machine, 40″ max diam capacity, 6″ stroke, 6″ riser assembly , 4″ spindle, machine gone through and adjusted , inspect under power In excellent working condition in our Statesville NC plant                  Reference Number: 4127

__________________________________________________________________________________

FELLOWS model 36-8 Gear shaper 40″ diameter capacity, 8″ stroke, 3 dp , Cutter Elevating option , 12″ Riser assemblymisc change gears and tooling, inspect in our NC Facility           Reference Number: 4110

__________________________________________________________________________________

Fellows Model 36-8 Gear Shaping Machine , 40″ diameter , 8″ Stroke , 3 DP Cutter Evevation, 12″ Riser assembly, pendant control, Inspect machine under power in our NC Facility                   Reference Number: 4111

__________________________________________________________________________________

Fellows Model 36-8 Gear Shaper with 9″ Stroke, Fine Adjustment, 15″ Riser, 5″ Diameter Cutter Spindle,        Reference Number: 3955

__________________________________________________________________________________

FELLOWS 36-10 Gear shaping machine, 40″ diameter , 10″ stroke , 20″ Riser assembly , 3 DP, change gears , inspect under power in statesville NC facility     Reference Number: 4107

__________________________________________________________________________________

Fellows Model 48-12 large capacity gear shaping machine, 54″ swing diam, 48″ max cutting diam , 12″ stroke cap, 2. DP, 24″ Riser Block , table assist , pendant control. 48″ t-slotted table, misc gears , Inspect under power in our NC Facility         Reference Number: 4108

__________________________________________________________________________________

Fellows Model 50-8 Hydrostroke Gear shaper, 50″ max diameter with 9″ max stroke and 8″ maximum face width, 45″ Diameter Table, 19″ clearance Height, Excellent in shop under power       Reference Number: 4075

__________________________________________________________________________________

Fellows model 645A Gear Shaper 18″ Diameter , 5″ Stroke, Hollow Spindle, Nice Condition              Reference Number: 4003

__________________________________________________________________________________

Fellows model 6A Gear Shaper, 18″ Diam, 3″ stroke, 4″ Riser nice condition                  Reference Number: 4002

__________________________________________________________________________________

Fellows Model 6A Gear shaper w/ Cutter Elevation, 24″ max diameter swing, 5″ stroke, 7″ Riser , internal attachment. excellent condition in plant running       Reference Number: 4056

__________________________________________________________________________________

Fellows Model 7125, 7″ max diameter, 1.5″ Face, 1″ riser assembly, Hollow spindle, 3-cut cam, excellent condition inspect under power in NC     Reference Number: 4071

__________________________________________________________________________________

Fellows model 7125a Gear shaper , 7″ max diameter , 2″ max stroke, good mechanical condition, inspect under power in statesville NC            Reference Number: 4132

__________________________________________________________________________________

Fellows model 7125A, 7″ max Diameter x 2″ Face, 1″ riser , Hollow spindle, variable speed, internal attach, 2-cut cam, 440/220 volt power. Inspect under power statesville NC    Reference Number: 4070

__________________________________________________________________________________

Fellows Model 8AGS Vertical Gear Shaper , 8″ diameter, 2″ face width. internal attachment nice                  Reference Number: 3927

__________________________________________________________________________________

Fellows Model Z Horizontal Gear shaper, 17″ diameter internal x 5″ face, 17″ hole through the table, face plate , cutter adaptor, for long shafts needing splines on the end.        Reference Number: 4069

__________________________________________________________________________________

Fellows Model Z, CNC Horizontal Gear shaper, 17″ Diam cap , 6″ stroke capacity, 3 -axis CNC General Numeric controller, Machine is equipped with 3-jaw precision workholding and shank style cutter. Inspect in Excellent condition             Reference Number: 4147

__________________________________________________________________________________

Fellows Model: 10-2 Gear Shaper, 3″ Riser, 2″ Stroke, cutter adaptor. under power in plant                    Reference Number: 3913

__________________________________________________________________________________

Fellows Model: 20-4 Gear Shaper, 20″ Dia., 4″ Stroke, 11″ riser, Cutter positioning, 2-available,Machines can be inspected in plant under power             Reference Number: 3911

__________________________________________________________________________________

Fellows, Model: 10-4, Gear Shaper, 10″dia., 4″ Stroke, 3″ riser in Plant under power !!                       Reference Number: 3912

__________________________________________________________________________________

Fellows, Model: 4A, Gear Shaper, 10″ Dia. , 4″ Stroke                          Reference Number: 3900

__________________________________________________________________________________

Fitchburg Horizontal Pinion Hobber, Model 8.42, 40″ Dia., 82″ Face, 107″ CC, Riser, 2 DP, Excellent mechanical condition               Reference Number: 3866

__________________________________________________________________________________

Gleason model 102 Hypoid Gear Generator, can be inspected under power (6) available                      Reference Number: 4014

__________________________________________________________________________________

Gleason Model 106 Hypoid Gear Generator, Max. Cone Distance 4.25″, Rebuilt 1985                     Reference Number: 3844

__________________________________________________________________________________

Gleason Model 23 Segmental Gear Tester. Max diameter 20″, Large Spindle Bore, High Accuracy, Excellent Condition    Reference Number: 3843

__________________________________________________________________________________

Gleason Model 463 Hypoid Grinder, Max Diameter 34″, Max DP 2, Max Face Width 3″                Reference Number: 3845

__________________________________________________________________________________

Gleason Model 496, Spiral Bevel Cutter Sharpener, New 1965       Reference Number: 3846

__________________________________________________________________________________

GLEASON Model 506 Gear lapper, 20″ diameter capacity , 10″ diam pinion capacity, full enclosure , 480 volt good condition , s/n 759106         Reference Number: 4148

__________________________________________________________________________________

Gleason Model 512 hypoid gear tester. 20″ max Gear Diam 10″ max Pinion Diam. 39 degree taper., hydraulic clamping, automatic cycles, many features. Inspect in NC under power                       Reference Number: 4145

__________________________________________________________________________________

Gleason Model 519 Universal Gear tester, Large Bore, 36″ diameter capacity, Mechanical clamping , Misc tooling for testing both straight and spiral bevel & spur gearing. Good Condition
  Reference Number: 4105

__________________________________________________________________________________

Gleason Model 606 Spiral Bevel gear cutting machine utilizing the generating method (4) available , inspect under power             Reference Number: 4015

__________________________________________________________________________________

Gleason Model: 17, Universal Spiral Bevel Tester/Lapper, Max Dia. Gear 18″               Reference Number: 3888

__________________________________________________________________________________

Gleason Model: J2ST Gear Cutter Sharpener,for 4.25″ Coniflex Cutters                    Reference Number: 3842

__________________________________________________________________________________

Gleason Pfauter model GP-150S CNC Gear Shaper, 6″ diameter gear both Int/external, 400 mm workpiece swing diameter, 50mm Max face width, 6 mm max modul, siemens control New 2005                         Reference Number: 4143

__________________________________________________________________________________

Gleason Pfauter model GP-300ES cnc Guideless Gear shaping machine, 300mm diameter capacity , moving column design and vertical adjustment poisitioning . siemens840D cnc control with minimal hours , excellent condition in plant              Reference Number: 4133

__________________________________________________________________________________

GLEASON-PFAUTER P1200/1600ES CNC Gear Shaper, with SIEMENS 840D, 1600mm Max Diameter, 2000mm Swing,400 mm Stroke Positioning, Installed 2011, w/SPECIAL SHUTTLE STROKE OPTION!!                           Reference Number: 3980

__________________________________________________________________________________

Gould & Eberhardt Model 120-G 3 Axis CNC Gashing Machine, 150″ ++ Max Diam, 50″ Max Face, 1 DP., Fanuc 18I Controls, Delivered 2009. condition excellent!    Reference Number: 4025

__________________________________________________________________________________

Gould & Eberhardt 60 S-2 CNC Gear Gasher, 60″ Diameter cap, 1 DP, Machine to be retrofitted with Fanuc or Siemens Controls         Reference Number: 3990

__________________________________________________________________________________

Gould & Eberhardt Model 160H Dual Column Gear Hobber180″ Max External Diam, 60″ Min Ext Diam, 55″ max Face length, 1 DP with HWD Hob Head, Coarse & Fine pitch worm & wheel, Excellent running condition in Plant        Reference Number: 4077

__________________________________________________________________________________

Gould & Eberhardt model 36H Gear hobber , 36″ Diam Cap. Differential, Infeed, 24″ Table Diameter,15″ Face, PUSHBUTTON CONTROLS can be inspected under power in our shop       Reference Number: 4031

__________________________________________________________________________________

Gould & Eberhardt model 36H Gear Hobber with Gooseneck attach, 2.5 DP, 18″ Face, Tailstock, Tooling , Nice Condition       Reference Number: 4001

__________________________________________________________________________________

Gould & Eberhardt Model 48H Gear hobber, 48″ max Diameter , 18″ Max face, standard H head, Differential, Infeed, push button controls, tailstock w/center, Excellent condition, inspect in our NC Plant                      Reference Number: 4125

__________________________________________________________________________________

Gould & Eberhardt model 48HWD, 40″ Diam. Cap, 2 DP, 20″ axial travel, 32″ Diam Table,8″ Diam Hob, Differential , Infeed. Good condition! inspect under power    Reference Number: 4030

__________________________________________________________________________________

Gould & Eberhardt Model 48HWD Gear hobber. 50″ max diam gear 18″ face width, 40″ diameter table , differential, infeed, hob arbors, misc change gears                      Reference Number: 4140

__________________________________________________________________________________

Gould & Eberhardt model 72H Gear hobber, 90″ Diam. Cap. 24″ Face, 40″ table Diam, Differential, Infeed, Pinion Support / Tailstock.                      Reference Number: 4029

__________________________________________________________________________________

Gould & Eberhardt Model 72H Hi-Column Gear hobber, 80″ max. Diam., 42″ face capacity, Diff , Infeed, High Precision worm and gear for high accuracy parts.  Reference Number: 4066

__________________________________________________________________________________

Gould & Eberhardt Model 72H (Hi-Column) Gear hobber , 80″ max diam. 40″ Face width, 1.5 DP, Diff, Infeed, 64″ under Tailstock , change gears. Misc tooling. inspect under power for short time in plant              Reference Number: 4136

__________________________________________________________________________________

Gould & Eberhardt Model 96-G Gear Gasher , 100″ Max , 18″ Min, Diam, 40″ axial travel, can be equipped with either 1 DP external or 1.5 DP Internal Gashing head, Remanufactured/ recontolled 2019 Excellent!!          Reference Number: 4142

__________________________________________________________________________________

Gould & Eberhardt Model 120-GH 3 Axis CNC Gashing Machine, 150″ Diam, Can extend to 8 Meter!! 55″ Max Face, 1 DP- 1/2 DP., Fanuc 18I Controls, Demo Machine , LIKE NEW CONDITION!!!! Call for More Info and options        Reference Number: 4141

__________________________________________________________________________________

G & E Gear Hobber Model 96H, Machine was in Excellent Running Condition from High Accuracy U.S. Naval Facility.      Reference Number: 3971

__________________________________________________________________________________

G&E Model 120 TWG Master Worm Wheel Gear Hobbing Machine, 140″ MAX OD, 8″ Axial, 1.25 DP , Excellent           Reference Number: 3868

__________________________________________________________________________________

G&E Model 24H Gear Hobber, 24″ Dia, 15″ Face, 3 DP, Infeed, Tailstock, Differential             Reference Number: 3867

__________________________________________________________________________________

G&E Model 48HWD Heavy duty Gear Hobbing machine, 48″ max diameter, 20″ face length, 28″ axial travel,Heavy duty worm drive head, Differential, infeed, tailstock, Excellent condition Inspect in NC under power                 Reference Number: 4117

__________________________________________________________________________________

G&E Model 72H Hi-Column Gear Hobber, Differential, Max Diameter 80″, Max Face 35″, 1.5DP., Max diam hob 10-3/4″ Super High Column, Tailstock                     Reference Number: 3872

__________________________________________________________________________________

J&L Model 12×45 thread grinder, 12″ max diameter x 45″ length, full tooling package, pendant control , good condition machine. inspect in our statesville facility                    Reference Number: 4149

__________________________________________________________________________________

Hey #3 Automatic Facing and centering machine, 6.5″ work diam x 72″ Length, 21″ max swing, tooling, Nice condition                   Reference Number: 4017

__________________________________________________________________________________

 HOFLER RAPID Model 800 XLK CNC Gear grinder , installed in 2014 , machine equipped Standard grinding head and with Internal grinding attachment. in plant ready for inspection. tons of options, very low hours !! call for inspection                       Reference Number: 4045

__________________________________________________________________________________

Holroyd Model 5A Rotor Miller, 25″ Dia, 50″ Max Length, Tailstock, New Electrics in 1996                    Reference Number: 3847

__________________________________________________________________________________

KAPP CNC Gear Grinder, Model ZP-12, CNC Control with Warm-up Program, Modem Connection, Remote Diagnosis              Reference Number: 3973

__________________________________________________________________________________

Kapp model AST305B Hob sharpening machine, 12″ Diameter x 16″ length, Wet grinding, coolant tank , with grinding arbors , work arbors, change gears and index plates, excellent condition                       Reference Number: 4150

__________________________________________________________________________________

Kapp Model RNS-581 5-Axis CNC CBN Gear Grinder for Rotors. 12.5″ diam x 76″ length between centers. 40″ max grind length. 360 deg. Head swivel Kapp D200 control, hoffman filtration and cooling system new 1998 Under Power     Reference Number: 4067

__________________________________________________________________________________

KAPP, Model KX300P RL, CNC Gear Grinder. 300mm capacity. generating and form grinding with automatic Loading , New 2010              Reference Number: 4024

__________________________________________________________________________________

Kapp, Model: VAS 331, Horizontal CNC Gear Grinder         Reference Number: 3916

__________________________________________________________________________________

Klingelnberg model AGW-232U universal hob Sharpening machine, 250mm diameter x 475 mm slide stroke of wheel , fully automatic, exceptional condition, for straight and spiral Gash hobs. inspect under power in excellent condition         Reference Number: 4116

__________________________________________________________________________________

Koepfer model WR8484 horizontal gear hobber, 120mm diameter cap, 250mm hobbing length, good running condition , large assortment of gearing                  Reference Number: 4063

__________________________________________________________________________________

Liebherr L-650 Gear Hobber , 26″ Diam Cap., 2.5 DP, 22″ Table Diam., 7.5″ max hob Diameter, 14.5″ hob carriage slide, 32″ max length of part. updated motor drive rebult 3 months ago , good running condition! inspect in NC!!        Reference Number: 4092

__________________________________________________________________________________

__________________________________________________________________________________

Liebherr model LC-282 CNC Gear Hobber, with Auto loading, Dry cutting, LH-90 Cnc Controls inspect under power , excellent condition NEW 2003                    Reference Number: 4038

__________________________________________________________________________________

Liebherr Model LC-282 6-axis CNC Gear hobber, Retrofit with Siemens model 828 cnc control, gone through and refurbished as needed. retrofit for 2019            Reference Number: 4093

__________________________________________________________________________________

LIEBHERR Model LC-80 6-Axis CNC Gear Hobber with Automatic loading. 80 mm Max Diam. 250 mm face, 6000 spindle RPM, Siemens Sinumerik 840 D controls NEW 2004, Excellent Condition               Reference Number: 4095

__________________________________________________________________________________

LIEBHERR WSC-1502 CNC GEAR SHAPER, 60″ diameter capacity, 13″ stroke , liebherr cnc controls , NEW 1993                   Reference Number: 3982

__________________________________________________________________________________

Lorenz Model LF-1251 6-axis CNC Gear Hobber, 50″ diam cap., 24″ face length, 9.5″ diam hob. 50″ diam table, Retrofitted with Fanuc 18I Motors & Controls in 2008, Excellent Condition    Reference Number: 4094

__________________________________________________________________________________

Lorenz LS-424, CNC Gear Shaper, 17″ Diam, 4.7″ Stroke, 6″ stroke positioning, H&K 783 controls, 8″ riser block excellent condition. new 1997.               Reference Number: 4028

__________________________________________________________________________________

MAAG Model SH600/800 Gear Cutter, 36″ Face Cap. 50 MOD, 8 Meter Max Diam. Excellent AGMA/DIN Quality. Under Power!! MUST SEE!!              Reference Number: 4007

__________________________________________________________________________________

MAAG Model SK75K Gear Shaper , 30″ Max diameter, 9″ Max stroke, 19″ diam Table, standard head, Oblique Head, Rack attachment, Pinion support steady rest. change gears, s/n 7530                   Reference Number: 4061

__________________________________________________________________________________

Maag model WS-2 cutter sharpening machine. for sharpening rack style cutters used on all Maag gear shapers. machine in excellent condition s/n 5652          Reference Number: 4054

__________________________________________________________________________________

Maag, Model: JVS100, Internal Shaping Attachment (8″ Stroke), Will fit models numbers SH100, SH180, SH300,               Reference Number: 3907

__________________________________________________________________________________

Matrix CNC Thread and Worm Grinder, 24″ Diameter, 86″ Grind Length, Remanufactured and CNC Controlled w/ Fanuc 180-iT controls & Saint-Gobain Dresser in 2010, NEW CONDITION!!              Reference Number: 3837

__________________________________________________________________________________

Matrix Model 46 Universal External thread grinder , equipped with filtration unit, change gears tooling , wheel flanges etc. inspect in Statesville NC
Reference Number: 4104

__________________________________________________________________________________

Mitsubishi Model FA-30 4-Axis CNC Gear Shaver, 12″ Max Diam , 3.1 DP, 6″ max tooth width, Fanuc controls, New 1992             Reference Number: 4009

__________________________________________________________________________________

Mitsubushi GA-GE Gear Hob Arbors (In Inventory)                 Reference Number: 3922

__________________________________________________________________________________

Mitsubishi Model GC-40 6 axis CNC Gear hobber, 16″ max diameter gear, 15″ face, 6″ diam Hob, chip conveyor, Fanuc Controls, new 1997 inspect under power         Reference Number: 4139

__________________________________________________________________________________

Mitsubishi Model GD-30 6-axis CNC Gear hobbing machine, 12″ diameter capacity, 5 dp, 15.7″ Axial travel, 29″ height under tailstock, Fanuc 18-IM CNC controls, New 2000 very good condition  Reference Number: 4099

__________________________________________________________________________________

Mitts & Merrill model No 8 Keyseater, 42″ Max length, 4″ Max width, 6″ Max Post Diam. lots of cutters!!                    Reference Number: 4032

__________________________________________________________________________________

Monnier & Zahner Ltd Model: M 544, CNC Thread Milling machine, a perfect Bone Screw Machine, New 2005. Machine is hi-speed and in excellent “like New” condition!!            Reference Number: 3931

__________________________________________________________________________________

Moore Model 3 Jig Bore, New 1967               Reference Number: 3850

__________________________________________________________________________________

Muratec Model MW-200 CNC twin spindle turning center with single gantry loader, 200MM diameter with 10″ diameter chucks, Loader Stacker, chip conveyor , in plant running new 2004      Reference Number: 4103

__________________________________________________________________________________

Nagel Model ECO 40 Twin Spindle CNC Bore Hone. For the MFg of high Precision bores, utilizing both Diamond and CBN Tooling. 40 mm bore cap, 200mm stroke, 1000 part height. Gauging , AB Controls , Excellent                           Reference Number: 4050

__________________________________________________________________________________

NILES Model ZE400S CNC Gear Grinder, 400mm diameter cap., Form wheel machine, CNC Dressing , probing, Standard External Grinding Head & Small wheelhead attachment new 2007 delivered 2008, Only 3200 Hrs LIKE NEW CONDITION!!                 Reference Number: 4043

__________________________________________________________________________________

OK, Model: SCT-3, Tool and Cutter Grinder, For Sharpening Shaper Cutter Tools              Reference Number: 3891

__________________________________________________________________________________

OKK Horizontak & Vertical milling machine, Model MH-3P 377-72, 14″ x 65″ t-slot table, 15″ X- axis, 12″ Y axis, 38″ Z-axis, Accu-rite DRO, supports , right andgle head, nice machine                      Reference Number: 4057

__________________________________________________________________________________

Okuma & Howa, Model: 25H-2SP, CNC Twin Spindle Turning Machine                 Reference Number: 3917

__________________________________________________________________________________

Pfauter Model P-160 Horizontal Gear hobber, 7″ diameter , 14″ hob length, Heavy duty splines, 4.5″ max diameter hob, 6 DP, 1-1/4″ hob arbor diameter. inspect under power in NC       Reference Number: 4131

__________________________________________________________________________________

Pfauter model P-400 gear hobber, 16″ diameter , 2-cut , crowning, tailstock , chip conyeyor. inspect under power!       Reference Number: 4026

__________________________________________________________________________________

Pfauter Model P-400 Hobber 16″ diam cap, 15″ diameter table, machine is equipped with special pinion sytle tailstock assembly for long shafts. good condition  Reference Number: 4091

__________________________________________________________________________________

Pfauter model P-400 Vertical Gear hobber, 16″ Diam Cap., Crowning, 2-cut, chip Conveyor, Tooling, Excellent 1975            Reference Number: 3999

__________________________________________________________________________________

Pfauter Model P-900 Gear hobber, 36″ Diam Cap. 19″ Face, 2.5 DP , 27″ table, tailstock, differential, 2-cut cycle , Chip conveyor, Excellent running condition! inspect in our Statesville location     Reference Number: 4098

__________________________________________________________________________________

Pfauter model P1800/2300B Universal Gear Hobber, 90″ Max Gear Diameter, 1 DP, Diff, Infeed, Tailstock, w/ Misc tooling new 1976             Reference Number: 4006

__________________________________________________________________________________

Pfauter Model P400H CNC Horizontal hobbing machine. 440mm diamater capacity 4 meter length, siemens cnc controls remanufactured in 2013 never used after excellent condition                          Reference Number: 4064

__________________________________________________________________________________

Pfauter Model P630 Gear hobber, 24″ diameter, 2-cut, crowning, conveyor , change gears, under power in plant                Reference Number: 4027

__________________________________________________________________________________

Red Ring Model GCY Gear shaving machine. 18″ max diameter, 5″ cross slide, 9″ Diam. cutter head, crowning mechanism. chip conveyor          Reference Number: 4079

__________________________________________________________________________________

Redin Model 24 Deburring Machine              Reference Number: 3851

__________________________________________________________________________________

Reinecker Model RFW2 Horizontal Pinion Hobber. 40″ max diameter x 120″ ++ Long part, 76″ Maximum cut length, 16 Modul, 10″ Max Diameter hob. machine has all New Electrics motors and drives w/ Siemens PLC and new panel. Inspect under power          Reference Number: 4065

__________________________________________________________________________________

Reishauer Diamond Dressing Discs SRA+ DSA, Winter, Fassler, Dr.Kaiser (Call For List)             Reference Number: 3924

__________________________________________________________________________________

reishauer Model RZ 150S CNC Gear grinder, 150mm diameter , threaded wheel style machine, High speed , excellent condition under power. with loading new 2007-08                          Reference Number: 4144

__________________________________________________________________________________

Reishauer Model RZ-301S, CNC Gear Grinder, 330mm Diam. capacity, with coolant and filtration unit, Dresser, all misc tooling, Wheel Flanges, additional parts & tooling, Excellent condition , under power!             Reference Number: 4089

__________________________________________________________________________________

Reishauver-Fassler Gear Grinder Parts + Compnents + Tooling From ginding wheels- Grinding disks               Reference Number: 3923

__________________________________________________________________________________

S & F MODEL 126 Gear Rolling Tester for Testing large Gear SETS., Easy adjustments made to check patterns, run out, etc.         Reference Number: 4005

__________________________________________________________________________________


Samputensili SCT3 Gear Chamfering Machine, 350mm diamx 500 part length, w/ shuttle type loader          
Reference Number: 3958

__________________________________________________________________________________

__________________________________________________________________________________

Sanyo Model 4MP-1H Piercing Machine,w/ Fanuc Powermate Control.,Auto Loading, high speed punching small holes 2008          Reference Number: 3852

__________________________________________________________________________________

STUDER Model S20 CNC cylindrical grinder , with fanuc controls , complete and running in customers shop for short time only , new 1995 , very accurate machine!   Reference Number: 4090

__________________________________________________________________________________

Studer model S50-12- 1600 CNC cylindrical grinder, 12″ diam. x 63″ part length, retrofitted with Fanuc controls in 2017               Reference Number: 3983

__________________________________________________________________________________

Sundstrand/Arter Model D12 Rotary Surface Grinder 12″ Mag Chuck, 10 Degree Tilt Tall                Reference Number: 3853

__________________________________________________________________________________

Sykes Model V10B Gear shaper, 11″ External Diameter, 4″ stroke, 8″ Max PCD Internal gear, 10″ table Diam. 3″ table Bore, with auto cycles!!             Reference Number: 4035

__________________________________________________________________________________

Thompson Horizontal surface grinder Model 3B , vertical spindel type 12″ x 40″ magnetic chuck, 12″ wheel diam x 1-1/2″ wide, 8″ max under the wheel, New mag controls, coolant tank , accurate machine, tool room machine            Reference Number: 4102

__________________________________________________________________________________

Tos Model Fo-16 Gear hobber, Max Dia. Gear: 63.0 in, Max Diametral Pitch: 1.25, Max Face Capacity 22″                Reference Number: 3854

__________________________________________________________________________________

TOS model OHA-50A GEAR Shaper, 20″ Max Diam, 5″ Max Face width, 3 DP, max Mod 8mm, 20″ table Diam. Stroke positioning, PLC controls, Excellent condition, Inspect under power New 1997                 Reference Number: 4146

__________________________________________________________________________________

Wanderer Horizontal Spline & Pinion hobber, Model 31-NU-5000, 12.6″ max diameter x 197″ cut length, 22″ swing over bed ways, for milling or hobbing, several heads & tooling, new 1996   Reference Number: 4060

__________________________________________________________________________________


Wera Profilator Model RM-130, for deburring and chamfering, etc, siemens CNC controls , auto loading, 2 available , new 2002 it is a Polygon machine for slots and crowns, SEE EXAMPLES!!   Reference Number: 4081

__________________________________________________________________________________

Wheelabrator-Frye,Shot Blast and Peening Machine , Model No.1-A, Multi-Table, 13″ tables with External Blast Cabinet , new 1978         Reference Number: 3926

__________________________________________________________________________________